How To Connect Speaker Wire To Binding Post. Depending on how you wire things, you may need an nl4, or two of them. You must use a neutrik speakon compatible plug.
They are able accommodate speaker wire connectors that require a clamping action in order to transfer a signal. If using the speakon output, connect the positive terminal of the speaker to speakon pin 1+ and the negative terminal of the speaker to speakon pin 2+, then plug the speakon. Steps for connecting speaker wire to binding post terminals on subwoofers:
Table of Contents
If Using The Speakon Output, Connect The Positive Terminal Of The Speaker To Speakon Pin 1+ And The Negative Terminal Of The Speaker To Speakon Pin 2+, Then Plug The Speakon.
If using the binding post outputs, connect the positive terminal of the speaker to the positive terminal of channel 1 and the negative terminal of the speaker to the positive terminal of channel 2. The first way is to unscrew the black or red cap from the binding post, insert your speaker wire into the hole, and screw the cap back on. Make sure enough portion of the metal wire is inserted on them.
Twist The Wire Tightly By Hand To Keep The Wire Strands Together.
Release the terminal and the wire will be held in place. You can wire these connectors in two ways. The trs and xlr are input connector types, and the amp has combination jacks that accept either.
To Hook Up The Wire To Such A Connector, Start With Unscrewing The Plug On It.
You must use a neutrik speakon compatible plug. You can also insert wires into the ends of the binding post and attach them with banana plugs. In the sound window, on the playback tab, find the entry for the speakers connected to your computer.
To Use Spade Connectors Like These Pictured, Simply Unscrew The Binding Post On The Back Of The Amplifier Or Loudspeaker And Place The Fork End Of The Connector Against The Binding Post Shaft.
Insert each of the cables into the hole now this is the most crucial part on which the entire connection depends on.insert each of the cable openings to the relevant binding post holes. This connection is one of the most popular. Strip the speaker wire to about 3/8″ to 1/2″ length bare wire.
Depending On How You Wire Things, You May Need An Nl4, Or Two Of Them.
Also, note which way you have connected up the wire in terms of polarity. They are able accommodate speaker wire connectors that require a clamping action in order to transfer a signal. As part of our fluance ultimate guide to home theater setup, we will walk you through how to connect your speakers using speaker wire and binding posts.