How To Fix A Leaky Hose On Kitchen Faucet. Remove the packing screw inside the handle assembly. Also, remove the cam with the tool provided in your replacement kit, washer, and the ball.
In the past we changed the cartridges to fix drip leaks but this time, one of the faucets was so corroded that we had to drill a hole in the handle to get it off. Check the spray hose by turning on the faucet and turning it off when you have found the damaged spot. Dripping, leaky faucet driving you nuts?
Table of Contents
If A Leak Under The Sink Is A Culprit Of A Faulty Sprayer:
Unlike the ‘ball and socket’ joint, usually, a white color rubber ball corks the socket. Is your pull out faucet leaking or difficult to operate? Before replacing the packing washer, turn off the water supply.
Once You're Past The Leak, Repeat The Procedure In The Opposite Direction.
Wrap the threads on the coupling connection with plumber’s tape. The movement of this ball controls the release of the water. This is the most common moen kitchen faucet.
Use Pliers To Do This.
Unscrew the coupling at the end of the hose with either a pair of pliers or wrench, if this is where the leak is coming from. Tighten the connection at the faucet with a wrench, turn on the water and check for the leak. Check the spray hose by turning on the faucet and turning it off when you have found the damaged spot.
If You Are Lucky, You Will Only Need To Tighten A Loose Cartridge Nut To Stop The Leak.
The issue will be resolved by replacing the sprayhead hose. This video will show you how to replace a kitchen faucet hose for your pull down spray head.this vid. Examine the rubber washer inside and replace if needed.
Find Project Details With A Tools And Materia.
Start a couple of inches above the leak. Watch how to figure out the problem and repair a single handle faucet. The first thing you need to do is determine if the water leak is coming from the base of the faucet or is it leaking through the spout.