How To Reset Maintenance Light On Toyota Corolla 2010 Ideas

How To Reset Maintenance Light On Toyota Corolla 2010 Ideas. 2011 toyota corolla maintenance light reset instructions. This video shows u how to reset the maint req'd light after doing an oil change on a 2010 toyota corolla.

HOW TO RESET A MAINTENANCE LIGHT ON 2010 Toyota Corolla 1 from www.youtube.com

Ensure trip metre a reading is shown. When a service technician changes the engine oil in the corolla, he resets the maintenance light so it will not turn on again until the mileage threshold is reached. Turn the key back to “off.”.

Put Your Key In The Ignition And Turn It To Position One (Right Before Starting The Car).

At this point, the maintenance light will turn off. Turn the key so the car is on. While pressing the trip meter reset button, press the engine start stop switch once (do.

How To Reset The Corolla Maintenance With A Color Display.

Keep holding the trip reset button until the miles section of the odometer flashes zero. 4 press and hold the odometer reset button. Some models don’t have the.

Continue To Hold The Odometer Button For 10 Seconds Total.

At this point, the maintenance light will turn off. 2 press the odometer reset button repeatedly until trip a is displayed. For toyota corolla (2009 2010 2011 2012 2013 2014 2015 2016 2017 model year), especially with the trip button on the instrument cluster, you can use the following method to reset the maint reqd light:

Turn The Key Back To “Off.”.

Push and hold the trip meter reset button on the dashboard, then turn your key to the second position. Many toyota corolla models are equipped with a maintenance reminder light that turns on at regular mileage intervals to remind the driver to get the engine oil changed. 3 turn the ignition to the off position.

While Pressing The Button To Reset The Trip, Turn The Key Back To The “On” Position.

This video shows u how to reset the maint req'd light after doing an oil change on a 2010 toyota corolla. Quickly push and hold the odometer button on your dashboard, then turn your key to position two. The flashing dashboard light will go off and the reading on the odometer will reset.