How To Use Transfer Paper Cricut. Peel liner from transfer tape. Load printer, transfer paper facedown (lined side facing up).
Then peel the backing off as. Use a scraper to burnish transfer tape onto your design, working outward from where you attached the small area. Allow it to dry, then apply a second coat, and allow it to dry again.
Table of Contents
Remember To Keep This So You Can Put The Transfer Tape Back On It For Use Later.
Place the transfer paper onto the cutting mat › select the flashing load/unload (arrow) button. Now new and improved, our tape holds better during transfer and peels away cleanly once your design is in place. Cricut® transfer paper was specifically designed to make transferring vinyl designs to project surfaces a cinch.
Select The Flashing Go Button On The Machine.
Once you have your vinyl in place, use a scraping tool or your fingernails to run the vinyl onto the receiving surface. Use a scraper to burnish transfer tape onto your design, working outward from where you attached the small area. Peel back the backing paper.
Peel Liner From Transfer Tape.
Place cut design face down on apparel, clear liner on top. Rub it from one side to the other. You can use the scraper tool or an old credit card to make sure the design is attached tightly to the transfer paper.you dont need to use transfer paper to.you need to cut out a piece of heat transfer vinyl that is the size of the phrase according to design space and place it shiny side down to your blue or green cricut mat.
Peel The Backing Paper Off The Tape And Place It Sticky Side Down On The Top Of Your Vinyl.
This can either be the center or one end of your design. Insert uploaded image & resize if needed. We are trying to keep it from getting bubbles or to wrinkle the vinyl.
Make Sure The Cricut ® Machine Is On.
If small enough, copy and paste your image to print more than one per sheet. Let cool for two minutes before very carefully peeling off. Attach a small area of transfer tape to your design.